skunkworks
Members-
Posts
122 -
Joined
-
Last visited
Reputation
90 ExcellentPersonal Information
-
Location
use east coast
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
thanks very much @Gixer1460 and @davecara you guys are awesome. standby for results
-
a hi res wiring diagram for the ECM to the M-UNIT would be useful.
-
quick recap. 1988 1127. 2005 gsxf750 ECM. m-unit blue. all inputs work. ignition output provides 12 volts to coils.WTF? ok so I've tried to wire it every way from Sunday and I have no spark.... I have 12 volts at the coils but no spark. so when I ground the ECM like it says in the revival cycles instructions it takes power away from the signal generator. (when I don't ground the black/white it has about 11 volts in the ground wire) and power returns to the signal generator. I have tried the 100 omh resistor and it knocks it down to 8.5 volts (in the orange /yellow)when grounded(black/white) and still no spark. is it possible that both coils are bad? its lucky it doesn't have a face because if it did it would of got punched by now. please help
-
anyone have an 1100 ecm they don't need?
-
I did search around and I can’t find a clear diagram that’s why I’m asking here.
-
hey guys how ya doin? I need some help. im half way through wiring an m-unit blue into my 83 katana. the engine is an 88 1127 the ignitor is a 2005 gsxf750. can anyone give me a wiring diagram of the ignitor to the m-unit? I have everything else talking to the m-unit just fine. its just the ignitor that's getting me all bollocked up. thanks guys.
-
So it’s my 83 katana with an 1127. The bike came with a 2005 gsx750f Kat motor and wiring all from that 05 bike. because I’m an idiot I let the smoke out of the harness. After buying 3 separate harnesses from Eblag, all as bad as each other I decided it would be cheaper and easier to start from scratch. I have all the hand controllers doing what they are supposed to do. The igniter is the last piece of the puzzle.
-
this is my igniter. Can you help me get from the m unit to this igniter. Am i coming out of the m unit ignition out into the white? thanks for your help,cheers
-
hey guys how ya doing? im wiring in an m unit blue right now. starting from scratch.( don't ask) so far I have the left and right hand switches taking to the m unit.the ignition switch is almost sorted. now the ignigtor has me all balls up. can someone shed some light on how to wire the ignitor? oh the controls and ecm is from a 2005 gsxf750f . any help would keep me looking youthful.
-
thanks very much @davecara
-
ok I just picked up an m-unit blue. can I use my OEM ignition box off my 05 gsx750f harness? thanks guys
-
thanks men
-
so what is a better way of splicing into a wire instead of soldering?
-
so after doing battle with an assortment of Eblag harness's I think im at the point of starting from scratch. my 83 katana has an 88 1127 in it. any issues using a dyna 2000 with it , does it all play well together? should I base my harness on an 88 1100 wiring diagram? thanks guys