[Run with no base gasket]

10 hours ago, Joseph said:

Something like Loctite MR5972 probably

Theres another one i didn't bookmark, i know they use it to seal the half cases of Porsche or other split case engines. It's main trick, is that it is the contact between metals that polymerises the substance, otherwise it is oil soluble. The idea being that if any extra seeps out on the internal side of the engine, dry gummy stuff won't risk falling off and blocking an oilway or such

https://sierramadrecollection.com/Loctite-574-Case-Sealant-p17329.html

[Malpassi regulator question]

Cost of bits I am assembling for my project (GS1100G) Speeduino kit is around $A230.  https://www.everythingfuelinjection.com/store/   Most expensive part would probably be the GSXR600 throttle body GSXR600. Not sure what they go for in UK but I got one in NZ for $250.with injectors, TPS, etc. Pump from ALiExpress about $NZ70, Madhu regulator $US30 https://www.madhu.com/content/Main/FuelPumpController  Tuner Studio (free to $US100) Bits and piece will no doubt add far more than I expect

[GS1100G NEED NEW REAR SHOCKS]

Ikon  (Konis made under licence in Australia) https://www.ikonsuspension.com/