LLD

i forgot this one

You can have the drawings if you want, just let me know

Final result

New mounting points, with larger diameter to fill the 25mm hole and option to connect both points. Mind you, this will need modification of the inner fender. But mine was damaged anyway, so no broken heart here

Cut out with an holesaw (25mm), fitting just around the original studs

I would not put the mounts through the tube. Way too little meat around the mount

Above pic was with a standard 750 K8 shock. Now it has an Ohlins aftermarket one, still with reservoir attached in same orientation

That is a good point. With piggyback shock you loose some space for a battery box. In my case not an issue as I made a new one for a lithium battery anyway

Above some pictures of my attempt to monoshock a GSX frame. At the same time installed beefier swingarm axle points. The laser cut template is to maintain the correct geometry of the suspension linkage. Swingarm is a B12

Thank you for the feedback !!!