[swingarm 1989]

Hi, is there a difference in lenght between the 750 and the 1100 Gsxr 1989 mod? 

[alternative footpeg hangers for slingshot]

Ok I had the same xperiance.

[alternative footpeg hangers for slingshot]

Hi Baldrik, are the " holy" ones for sale?

[Slabside 750 Ride Height]

Dont eat anyth. for 6 weeks,and you be all goodiegoodie.

 

[Front end weight]

Ok Thanks.

[Front end weight]

Hey Mates,And A Happy New Year to You all.Is that weigt incl. forkoil?

 

[Own head work - Port and polish]

Thank You,this is going too be expensive,but WTF you have one life.

[Own head work - Port and polish]

Nice pics Dunc, whit what carbs,cams and exhaust?

[Own head work - Port and polish]

Hi Kivi,I found these fotos on the I net. Are supposed to be very good. Good luck with the old cow! 

[V&H CDI Good or Bad?]

Hi Ice, yes look at the first picture,top right,little blue sqare with four white swiches.

[V&H CDI Good or Bad?]

Hi, is there anyone who have tryed this box? What color is Pos. and Neg. in to the box?

[Head Gasket]

I have done it without any problems 2018,2019, only make my bike go faster, you only take away 0,5 mm.

[No more expensive Chain-Lube.]

Ok I wont,fingers crossed.

[Head Gasket]

You know you can get some moor comp.for free, take away two of the three shits of the headgasket,clean it and spray it with Loctite Gasket.

[No more expensive Chain-Lube.]

HeHe, Lowside?

[No more expensive Chain-Lube.]

Hi guys, is this a good idea? 3/4 " alu.pipe as a, combo, crankvent., chainlube?

[The Beast!]

5 hours ago, Swiss Toni said:

Something lost in translation? 

Nooo ,do you  want to dance?

[The Beast!]

I am a shorty! Thanks!

[The Beast!]

Not very Muucc!

[The Beast!]

He He what are You  tacking abbout?

[The Beast!]

This is My Beast, want too Try too beat it ? Welcome! 

 

[Crankcase vent.]

13 hours ago, Racer-X said:

Yes current engine (1127) runs with no starter clutch. No vibes from removal. Picks up revs much quicker..... if you are running total loss and removed the alternator, if you think out of the box, there's still rotational mass to lose there too!!!! That's all that I can give, can't give all my secrets away! 

Yeah,I did some adj. too the bits that drive the gen.Give away all your secrets,there are only nice Suzuki fans here!

[Crankcase vent.]

I will remove the whole starterapp. from the crank,have you tried that? Will i have problem with the balans,vibration?

[BST 36 mm.]

Ok, thanks!

[BST 36 mm.]

Sorry, if this have been asked a hundred times, but what are your opinion about drilling the slides by 3,2 mm. 0125" and cutting off 2 coils from the spring,all to the Mikuni BST36.