I bought this bike off a now retired work colleague,it’s my first venture into a project, the bike has been laid up in a shed for 10 ish years then spent 5 years outside with a perished cover on. It’s a 3 owner bike with just over 11k miles on the clock. Initially I drained the fuel, removed and inspected the plugs, found the gear gear selector had seized, after freeing off the selector and confirming the engine would turn over and checked the clutch was working I removed one of the carb tops, carb was super clean inside! So I refitted the plugs and put fresh fuel in and connected a battery, ignition switched on, all lights and indicators work, gear position indicator works! No starter motor though? A quick clean of the kill switch sorted this, after a of few attempts at starting the old girl fired up! But only on 2 cylinders, a quick download of the manual + a bit of reading to understand how the ignition system worked lead me to find a broken wire on one coil pack, a solder repair later she is now firing on all cylinders! I am now at a crossroads, I’m unsure what to do! is it worth restoring? Should I use it a base for a custom project? Or let it go to someone else to restore and cherish? as I see it the minimum it needs to get it usable is: Replacement exhaust, fork rebuild/ replacement, new tyres, full brake overhaul, new battery, full service & new chain, after all this cosmetically it will still look like a pile of crap! Any advice or inspiration gratefully received!!! Lol!