Cunnerz77

Nitriding is just for surface hardening and reducing wear.

Blimey...ballsy work!

My K1 marchessinis went straight in the SRAD, but front and rear need a couple of spacers. Pretty sure you can make it work without major mods.

Fantastic wrenching Sander - really well documented too. Love these winter escapes you're doing as well!

Ya learn something new everyday. I started here thinking you'd shoehorned the 1100 in. Absolutely mega bike and love all the flash bits. Just read a bit on the model. Very interesting.

Outstanding. Such a clean build.

Love that you chose the ET swingy. Its actually what caught my eye first when I saw @Jelly's 816 GSX...which is consequently now under my supervision.

I love this story already. Carry on.

I havent been to Zandfort but I think its probably the same as Assen - will find out. I had a rudimentary db killer in my Yoshi duplex at Assen, and had no problems at all. All the locals thought it was fine. Having said that we did also have Hans on side, who had conveniently mislaid his db meter...

Cheers @dupersunc! I hear Zandfort is almost as good as Assen, 40 mins from my place too - will happily provide beers, shed and beds for travellers or anyone needing it.

Alright sweet, got a plan. Thanks for the help chap.

Outstanding! Brilliant video. How much shorter were the dog bones to get 30mm higher? Or was that 30mm on the dog bones?

Gotcha, thanks. Just spent a fortune on fairings and paint etc so I really should have asked this question before! One more question sir - If I raise the back by 10mm on the dog bones, and leave the front at the same height....I assume it would then be overly twitchy? What sort of angle do you winged hammers run on your bikes? The bottom of my frame is at this moment completely level.

Brilliant thanks very much! Understood on the dog bones and thats great that they dont need to be welded. Do you know if they are particular type of steel or would regular cold rolled plate be OK? On the 750 - I didnt quite understand this. So I need a 750 nose, and an adapter to make it work with the rest of the 1100 fairing? Thanks again. Very helpful.