Jump to content

vitesse

Members
 View Profile  See their activity

  • Posts

    14

  • Joined

  • Last visited

Reputation

6 Neutral

Personal Information

  • Location
    Belgium

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. vitesse
    Hi everyone, so a while back I bought a B12 engine really cheap but with all motormounts broken... I've got engine cases from a gsxr 1100m and since I 've just found a GSXF 750 engine with a Dot head I was thinking of transferring the internals of the B12 in the 1100m cases using the DOT head and use cams out of a gsxr750m... Is this doable, is there any gain (carbs would be the 38mm from the 750m) Need your axpert advice of what is involved here.
  2. vitesse
    Floaters in 1 carb are missing in the b6 carbs, otherwise, I'm putting a yoshi exhaust of the same teapot and kn filter in the std airbox, si I guess i'll stick with the teapot-carbs .
  3. vitesse
    So here it goes : I got a b6 for next to nothing and I'm redoing it to pass on to a friend of mine. While dissassembling the carbs( CVK32) I noticed parts missing like the floats and some other stuff. I've got carbs from a teapot 600 in my stash and these are flatslides (bst32) . Wich one do I rebuild? Wichone is better? Thanks for your expert advice, fellah's
  4. vitesse
    Yep, indeed the rear lights work. As you mentioned I will bridge the negative from the battery to the headlamps and put some relays in the circuit asap. In my case as it's a european spec 1100m there's even 20 amps blowing through the handlebars. Thanks for the advice, everyone!
  5. vitesse
    Apparently models before 91 had relays, my 91 hasn't unfortunately. Wonder if 750m looms are the same as the 1100m ones, if so I'll just swap them. Problem is I'm in Spain with the bike and the looms are in Belgium...
  6. vitesse
    Apparently no faults in the sub-loom I think somethings going on in the big harness towards the rear
  7. vitesse
    Unfortunately no....
  8. vitesse
    Hello peeps, After some years of hibernation, I 've decided to dust of the cobwebs of my 1100m, everything seemed to work fine and now for some reason the headlights won't light up, all else works perfect. When I try to switch on the lights, only the high beam indicator lights up (even with no high beam) and position light is very weak. I've tested the handlebar switches and they seem to work ok without shorting. I'm beginning to think some rodent had a go at my cable loom...
  9. vitesse

    '91 750m carbs

    vitesse replied to vitesse's topic in Oil Cooled

    Thanks for the information, what is the effect of this on power and torque?
  10. vitesse

    '91 750m carbs

    vitesse replied to vitesse's topic in Oil Cooled

    Thanks, I will certainly check out factorypro !!
  11. vitesse

    '91 750m carbs

    vitesse replied to vitesse's topic in Oil Cooled

    Can't believe I've never posted on here before
  12. vitesse
    Are the 38mm carbs any good on 1100 slabby and 1100m motors?
×
×
  • Create New...