Mark28
-
Posts
132 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by Mark28
-
-
nice to hear about good service
- 1
-
very clever.Bet I leave the sand in lol.
10mm pipe? and rubber hose to fit to it?
-
how did you bend the pipe?
-
17 hours ago, Arttu said:
Here's how I have it on my GSX. So the block goes on place of the original petcock, the return goes through the pipe and another connector is outlet.
Thank you just what I needed
-
Would any of you be willing to share pictures of your fuel returns.I'm having a brain fade trying to plumb it into my et fuel tank.
Mark.
-
Yes,was being kinda lazy.
-
Did my own homework and found out on the MTC website.
-
Am I Ok using Bandit 1200 piston ring clearances on my MTC turbo pistons or do I need to go slightly larger allowing for heat?
Mark.
-
Are they not from the gear selector? 9 and 10 on the diagram.
- 1
-
Threebond for me,never seen any in a filter.
- 1
-
If it's being aqua blasted the finish should be really nice and fuel proof without painting it.
-
thank you
-
Could someone please let me know what the distance between the bolt holes is where the mounting brackets mount to the top yoke please.
Thank yoooo
-
Excellent.who are you using?
-
7 hours ago, clivegto said:
I am getting a gear box super finished for my latest engine build.
I have used this on a few ( Starts with a Y ) race bikes and it really does work. It is worth having the cams and followers done at the same time and maybe even the rods to help reduce stress.
I had a full engine done once and it was sooooo smooth afterwards.
-
Is there a reliable replacement? About to build a turbo motor myself.
-
Thankyou. Glad the taxman left me some money in January.
-
Thanks.So as long as I get std Hayabusa compresison ones not the lower turbo ones it should be ok.?
-
yes that's what I was going to get,Seen some Busa ones for £390 though hence the query.
-
I'm currently looking a pistons for my turbo bandit build and have noticed that turbo hayabusa piston kits are cheaper than the equivalent Bandit ones.As I could fit standard Gen 1 Hayabusa pistons am I right to assume I could just buy Gen 1 turbo pistons too? The ones I have seen are 9 to 1 Cr.
Thanks.
-
Indicator relay?
-
Thankyou, every day is a learning day.
-
What are you removing by doing this?
-
I have an unknown harness here that has been messed with,If any of the plugs match what you need let me know and I will remove them for you.
Turbo engine prep
in Forced Induction
Posted
I had these,they get great reviews by the car guys.