SiBag
-
Posts
1,363 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by SiBag
-
-
Check out All Balls website.
You might find the info you need.
If your doing a stem swap it will be the stock blandit size.
-
1
-
-
If you use the front lift arm on your abba stand you can get the front wheel off the the floor. Makes it a whole lot easier to fit the front fairing.
Looks fantastic..
-
1
-
-
5 hours ago, Hacksawmad said:
ah so the part numbers include color codes
Unfortunately,
And as the colour schemes changed from year to year I'd say it's impossible to check if one will fit different models.
-
The trouble with trying to check part numbers of the panel is they are all different because of the colour scheme.
-
2
-
-
Planning to make it this year.
-
1
-
-
Hi,
Welcome to OSS.
If it's been sat for over a decade I would suspect the o-rings / gaskets in the carbs may have dried out and shrunk. If your lucky the may swell and re-seal now the carbs have fuel in.
It could be a sticky needle valve etc.
I'm sure an adult will be along with a proper answer.
-
-
-
What's the score with camping etc for this one?
Doh! Just answered my own question by looking at last year's post.
-
1
-
-
1 minute ago, Mike990 said:
Thanks for the info- I'll register it to me on the Bimota forum.
BTW who is Oily?
Oily use to be on the original OSS forum and did a lot on the bimota forum. Lived in Kidderminster. Not heard anything of him for a few years.
-
1
-
-
Bimota went bust in 1999. I think a few SB6 were built out of what was left in the parts bin around that era. Mine is 2000 registered.
@Mike990looks like you have one of oily's bikes.
There is a list of known frame numbers here.
-
Ye I'm in.
-
I'm game, gutted I missed Stafford.
-
Interesting turnout. Who's is the stink wheel?
-
Gsx1400, Xjr1300, Zrx1100 there are quite a few nice twin shock rear ends to choose.
-
3 hours ago, XXXSpro said:
Did you use the teapot cams or the bandits?
I used 1100 K cams.
-
1
-
-
Welcome, and nice work.
You obviously know what your doing with a tig torch.
Some of of your previous build look interesting. Is that a HUC savage frame?
-
4 hours ago, Mike990 said:
How's your ride height set on yours? My rear is backed right down and the forks are fully through the yoke - so it's a bit like a chopper.
There isn't a lot of adjustment at the back. You can wind the eye in and out of the shock. I was thinking of getting som dog bones made up. But the spherical bearing are a pain.
-
1
-
-
Air filter wise I have a K&N panel filter on mine. Think it maybe cut down to fit. Bin the aluminium splitter on the front brake line as they fail. You can add preload etc to the front forks using fork tops etc from zx9r.
And they are ugly as sin with their clothes off....
-
1
-
-
Blandit 12 doesn't have the idea gear. So possibly blandit with dot 750 head.
-
Hi @Qwik.
Fun looking scoot you have there. Welcome to OSS.
-
1
-
-
I'm very much in, no excuses..
-
1
-
-
If your looking for a push pull throttle try yam R1 . You can get them from 25 notes on evilblag
-
1
-
-
Red rubber grease and rachet strap works for me.
-
2
-
Stafford Classic Bike Show 20/21 April
in Events
Posted
Last OSS outing for Stinky.
Sold it within four hours of putting a for sale sign on it.
Twas a good weekend even if it was a little tiring. I'm too old for this s#*t..