Hi all,
First of all so glad to see OSS up and running again, was delighted when I discovered it was back by chance yesterday. Couldn't have built my 7/11 without the help from a lot of great minds on here.
So now to the main problem, have a GSXR750 SRAD that when the lights are switch on the starts to run rough. Originally thought it was when the bike was hot and the fan came on but can replicate the problem when bike is cold. Charging at over 14v no lights and 13.1v with lights on, and it starts to almost drop a cylinder.
Originally thought it was air leak when hot, changed intake rubbers as one was cracked, balanced carbs, set mixture screws, bike runs better than before until you are idling with lights on.
Then I tried charging system as when it was dropping to 12.5v volts with lights on at idle and 12.1v with lights and fan. Changed battery and reg/rec which improved the charge to the originally stated figures but still as soon as the lights are switched on it starts to run rough. Genny check out according to workshop manual. 19v per phase at idle, 55volts per phase at 5k rpm, nothing is earthed and all have continuity between each other.
Have checked the headlight wattages both are 60/55w. Have even changed the bulbs incase one was shorting but same thing.
Really stumped at this point and running out off ideas.
Anybody ever come across this before?