DesmoS4

Cheers bud Had a feeling that Allen’s was the way to go will give them a shout Cheers Desmo

I’m currently running RS36 carbs on the Slabby, they have the standard centre pull cable run at the moment and I’m wondering if anyone has moved the throttle to a side pull same as VM29s. If so what parts are required Cheers Desmo

Good looking build this, out of interest what year are the forks and wheels, it’s something I might look at for mine in the future Cheers Desmo

Brilliant result, It takes a great team of people to pull off result like that seriously well done to all of Rooster Racing

This is mine 750RR down pipes homemade 60mm link pipe into a shortened ZX10R Akrapovic end can it’s a bit loud but seems to match the engine well

Morning Gents & Ladies So I’ve got these NOS cams knocking around and as I’m about to give the slabby her winter lay down service I wondered if they would be worth swapping in Current set up is 750F bottom end mated to a 750L head running 750F cams, carbs are RS36 flatties with K&N pods, exhaust headers are from a 750RRK into a 60mm link pipe to a shortened Akrapovic end can off a ZX10R Part numbers are Exhaust Inlet Both cams are stamped 27A the exhaust is also marked with a C and R1 M. The inlet is marked with 27A F and R1 M. If I remember rightly 27A designates Slabby part identification but the searches I’ve done have been inconclusive. So what are they and will they work together and will they give me a worthwhile boost to what is already a pretty potent engine Cheers Desmo