Jump to content

gsx1100e

Members
  • Posts

    56
  • Joined

  • Last visited

Reputation

5 Neutral

Personal Information

  • Location
    Finland

Recent Profile Visitors

608 profile views
  1. Some pictures because we like them... I have three GSX´s just test fitting parts to one in pieces before moving them to red one later.
  2. Hello, I´m fitting 1200 bandit swing arm and wheel to -82 GSX 1100E Öhlins rear shocks from Ya...a XJR and 5/8" 530 offset sprocket. Chains come with different width´s (pin lenght) What chain you have used in these?
  3. I have inazuma gauges in -82 GSX 1100 E Just fuel gauge is not working, I guess there is difference in resistances of level sensors between models. Connecting gauges was quite straight forward job no big issues. Cant´t be 100% sure that one you looked will work but my guess is that it works
  4. Hello and Welcome! We like pictures and you have several ES's even one whir sn5 and 0 miles!!!
  5. What you are looking for, different looks or size?
  6. You can allways use some of those other bikes as donors for parts. It's good to look for something useful from those. welcome.
  7. 300W Race alternator! It is good to have options, perhaps there are some things to update before that. Link to that other site was also good.
  8. I think this could be easy modification to improve reliability of charging system, heat is not good in wiring or connectors. Do you series regulator model which works in gsx?
  9. Something new each day! Again one thing to check in these old Suzuki's
  10. It is 750cc engine and I think someone painted it black. I'm not expert, but at least what I have seen only later ones were originally black. Also Chrome caps on cylinder head look like early gsx.
  11. Whats the beginning of your black engines number?
  12. So whit series regulator there would be less engine power lost to charging system? Whit small gsx generator loss is not huge, but still there would be more usable power to move bike whit modern regulator If I understand correctly...
  13. I have same plans b1200 swing and xjr chocks. have collected parts and looked how others have build these. In lucky7 katana chock mount is bit offset maybe 5mm. Do you think chain clearance is ok if chock is in middle of swing arm?
  14. Welcome!! Don't worry about electrics everything can be repaired and ones you repair you learn.
×
×
  • Create New...