Fazz711
Members-
Posts
1,568 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Everything posted by Fazz711
-
It would be easier to swap engine than swap Suzuki shaft to chain. Something like bandit or power screen motor.
-
Agree with others the AC seems low. If you have a good battery charger and you are fully charging the battery it should run ok for a while. Worth trying to check if you have something draining the battery. Run an clip on amp meter if you can on try running multimeter in line set on amps I also suspect you have now got a duff battery.
-
Welcome to OSS. Nice project. We need lots of pics
-
Anything 5/8 or 16mm will do.
-
GS1100GL(Shaft-Drive) Suspension compatibility with GS1100(Chain-Drive)
Fazz711 replied to TheSlainhart's topic in Air Cooled
I think the GS1100 will be the four valve motor as in USA that was their designation not GSX as the UK four valve was. Nearest equivalent to two valve GS1100g would be two valve GS1000. Some of the four Valve are twin shock some are mono. A pair of shocks for GSX et would probably not be far off -
GSXR 750 W Rear Solo Seat Fairing
Fazz711 replied to Muddy's topic in Water Cooled, V-Twins, Singles and 2-strokes
Dose the sun frame have extra braces? Most race bike don't use them if they are fitted as it is extra weight they can do without. Also a lot of the electrics are trimmed back to bare minimum. -
Oh do jealous I love astalites
-
530 are now much better chains. No brainer really
-
Interesting (detailed ) Yoshi gs1000 Magazine article-1979
Fazz711 replied to R1guy's topic in Air Cooled
Great reading. -
New aftermarket fork stanchions or originals rechromed...
Fazz711 replied to Zappa's topic in Oil Cooled
Another vote for Philpots Had quite a few done over the years and all been very good. -
Normal bulb or LED?
-
Bit of stainless steel rod of the right diameter and length will do the job
-
I don't think so but others will confirm
-
Have you checked the routing. Had it in the past and it made big difference
-
Have a look on some of the 3D printer sites. I am sure I saw some a while back. You may be able to download the file and get the dimensions of it.
-
May be Davida Think they did a steel one that looks very similar
-
Rasska are nice but the last set I bought the quality was a bit iffy.
-
Glad she is getting better. Hope for full recovery.
-
Hi Peris. Give the pilot jet and circuit a good clean and go from there. Will be better than getting some other carburetors to work. Hope you can sort it
-
It leads you to a site called cults3d
-
I found a GSX1100 version of the top one on a site called YEGGI. If you search about on the site you may find the 750 version
-
gsx-r 93 GSX-R 1100 WP advice needed
Fazz711 replied to JezzR's topic in Water Cooled, V-Twins, Singles and 2-strokes
Not sure why you would resurrect a old post. Why not just start a new one with your information. -
Got a quote for Harris Rotax recently and they want £170+ Vat Had one off then before and they are top quality but it was a bit to steep for me