Brian foord

I have re routed cable with standard style cable it’s made a big improvement. Got new clutch springs and plates on the way. As I think it’s got heavy duty springs as I seem to remember the previous owner saying he fitted them because the clutch was slipping a bit

Thanks can’t find a picture with it fitted to standard cover.

Does the ape one only fit with the ape cover?

Do you have a pic of it fitted?

Where can I get one

Going to buy a set of oem springs and clutch plates. As I think it may well have heavy springs fitted. Where can I get some oem springs from?

Yes I was looking at these. First thing I am going to do is buy some oem springs as I think they are heavy duty in it at the moment.

Unfortunately I may have to sell my newly built katana 1100 due to the clutch being so heavy I can’t pull it in more than 6 times will my bad fingers. it is so heavy it almost needs two hands. I really don’t want to part with it so do you guys have any ideas?

It looks like the oil leak is the neutral switch. Where can I get the o ring and can it be taken off with the bike on a paddock stand without draining the oil?

My katana 1100 has a oil leak from behind the sprocket casing. I think it could be coming from the electrical thingy behind the sprocket. Any ideas?

Fired it up and it’s not running good. I have fitted a air corrector kit from grumpy. When I give it a rev it misses and flames out pipe. Should I move the neadles up a bit? Can you get a dyno jet kit for the cv carbs?

Well it didn’t go brilliant. I started it up then fuel started pouring out the overflow and air filters. I took the tank off and the tap is pouring out fuel in all 3 positions

Tank on with fuel ready to see if it runs........

Mirrors are oberon. The screen is just a old one at the moment I have a new one but going to cut it about a bit first

Paint work is finished getting there now.

Yes it was very metallic. Can’t help with the paint code though sorry. house of colour do one very similar. If that helps you

Just need to Fit the decals then it’s some coats of lacquer.....

Has anyone got pics of there Dyna coils fitted to katana? My bike has been apart so long I can’t remember how they was fitted. Thanks

That’s great thanks

thanks let me know how it goes. When you have tried it.

No didn’t get any replies on that. How much have you lifted needles?

Getting very close now I am just about to fit the coils. Does anyone have any pics off Dyna coils fitted as I can’t remember what way the wires go ect it’s been so long since I stripped the bike.

Might leave it this colour it kinda suits it

Made a bit more progress, wheels are painted and have new tires, engine is fully bolted in, speedo bracket made, chain jockey wheel done, body work prepped and primer. Front mudguard cut down and painted. Next on the list is the wiring loom and battery tray.