dirky

cheers for the advice. will post up when i have some pieces done

Hi I am havivg the frame on my slingshot powdercoated. What colour do people use. Is there a RAL colour code for the colour of the standard anodized frame. Cheers for any info

cheers for the feedback will the oilcooled motors still drop into this easily

Morning brought this as a spare slingy frame but it needs to go and looking at it has me wondering. Is it slingy or first year watercooled. Everything looks right except for the thread in the frame on the end of the swingarm mount. Did this appear on the last oil cooled bikes or only after they changed. Cheers

Cheers. Motor in the blasters now. Will post up pics

re-measured at 78mm so standard 1127 . never seen a head with d shape dowels. thats what threw me. finish stripping and get it down the cleaners. cheers for the advice. wheres the best place to go for a full gasket kit. any recommendations

I found a pic of a slingy barrel on the net with round dowels but I’ve now found another with d shaped so looks like it’s standard. Good news

It has 1127 on side of barrels. Not looking for a special. Just hoping I haven’t brought a lemon.

Hi ive just taken the head off a slingshot 1100 engine I brought last summer. I had noticed the head was slightly off centre. Turns out the locating pins are missing as the bores have been enlarged so the pins won’t fit. Bore size is 77 mm. Any clues on What have I brought here..

Might be sorted. Found a 290 lurking around

Hi Need help figuring this out. Frame as far as I know is a 89. 750. So are the arm and linkage. Mocking up with a bandit shock. 320mm eye to eye centre. It’s pushing the linkage right down so much too big but when I set the arm at a better angle and put the tape across it I’m getting 290 I thought the standard shock was 319. Can anyone see where I’m going wrong. Cheers

Thanks for the info. didnt realise there were 2 different fork lengths. Have to figure out which ones I have

thanks for clearing that up. ii have a 750 frame and 1100 sides. plus bellypan. will the 1100 fairing bolt up to the 750 frame? not worth looking for 1100 upper if it wont

hi is there any info available on compatability of parts for slingy front fairings. i know the shape changed over the years but do the fastenings and edges line up. cant find anything in the search or googling. cheers for any info.

hi get a wiring diagram. one of the wires from the black box will go out and circle round all the safety gubbins,side stand ,levers ect. find it at the black box and make sure they connected it to earth. if not there proberbly still hooked up.