Jump to content

Del

Members
  • Posts

    309
  • Joined

  • Last visited

Reputation

173 Excellent

Personal Information

  • Location
    England,UK

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. http://www.m.pretech.co.uk/?totwid=412
  2. Nope,these Pretechs are designed for 320mm discs(slingshot,bandit 1200 and rf900 are 310mm discs). The discs in the picture are 310mm ebc cast iron(which is why the rust line) discs on gsxr750l forks and wheel. They still worked one finger braking,even with the smaller contact patch,so didn't bother me! I originally had the Pretechs on my old srad600(320mm discs),I now have them on my tls 320mm discs
  3. Srad600 and gsxr600k1-k7 are also 220mm. mk1/2 bandit600,bandit750,mk1/2 bandit 1200,rf600/900,89-98 gsxr1100k-wv,gsxr600wn/wp,inazuma 400/750/1200,gs1200ss,gsx1400 and mk1 busa are also 240mm. Yep,all the same
  4. 600 are long stroke(as are the 400/650/750),so are slightly taller than the short stroke 750. The 89 gsxr1100k has a shorter output/countershaft,than all the other oil-cooled engines
  5. Short stroke are 11fins,400/600/750 long stroke are 12 fins,1052/1127/56/57 are 14 fins
  6. Slabby 750/1100 are different because the frames are different,unlike the 750/1100 slingshots which use basically the same frames
  7. Just brought this micron srad system for my brother's slabby1100. It was £150 bnib and that was posted,so they are out there. 750Y and 600/750/1000 k-series will also fit. This is my old srad 600 with gsxr1000k2 headers, CCC 1000k5 link pipe and art can. The other pic is with stock 1000 link pipe and bolt on Remus can
  8. Del

    Bandit 1200 cams

    What Gsxr1100 do you have? As 1100k/l are screw/locknut and 1100m/n are shim heads. If 11m/n,then b12 cams won't fit
  9. I fitted b12/rf900 ebc discs to my 750l wheel,just spaced the calipers in by 2mm(a brass washer on each bolt)
  10. The headers are not heavy,it is the stock cans that weigh abit(and restrictive on the 1100). But I got round that by fitting harpoon cans/link pipes(fireblade on the right and RC30 on the left. Sadly, haven't got these anymore.)
  11. You could always go Turbo Teapot 6/12. Daniel Maddox old teapot with gsxr600k2 running gear There is also a 1340cc teapot 600 on Facebook
  12. I have a 89-92 gsxr1100k-n 4-2-2 complete system,that should fit okay. I can take some pics/measurements later,if you like ?
  13. And the gsxr1000k2 headers with CCC 1000k5 link pipe and micron can ☺️
  14. And this is the gsxr1000k2 headers underneath 750 full bodywork. Just needed to trim the rear of the bellypan☺️
×
×
  • Create New...