GSXR750WR Exhaust Options??????

[skunkrider2]

Has anybody fitted headers off a different model to a 1994 GSXR750 w.

Im wanting to fit a under engine can but the standard headers are 4 into 2 into 1. Im wondering if any 4 into 1 headers are a straight swap?

[Madb]

kinda like Bandit headers, or rf900 ? K1-k2 1000 ti headers will fit with in a bit. But a can under the engine?  

[Madb]

ignore the ti 1000 pipes. soz. they're 4-2-1. silly me. but they are light.

[vizman]

rf900 headers are 4-2-1 also

 

[Madb]

oh. thought they were 4-1 like a blandit. me bad. must have been an after market pipe i was looking at. Doh!.

[Dezza]

Blandit headers are made from double-skinned pig iron so maybe best avoided as 750Ws aren't exactly anorexic.

[skunkrider2]

Theres a lot of headers off 750 srad's  quite cheap on evil bay, but don't know whether these are a straight fit?

The idea im after is a can under engine exiting under swinging arm pivot (as in previous post) but my headers are 2 pipe and was trying not to cut link pipe up.

[Madb]

@ skunkrider2, I remember now asking ya not to chop the link pipe,yes?  Srad pipes, need some heat work get them to fit.  750 ones have a balance pipes between 2/3 (not sure on the 600)and as they are tighter spacing as the cam chain was moved to the offside (rightside) of the engine. but you can make anything fit.

Maybe look for some secondhand aftermarket ones?