Jump to content

My Gs1000g project


micktodd

Recommended Posts

  • 2 weeks later...

Mmmm that's weird, I have one in my gs850/1000g years back I know it was a bit of a wiggle.

You had to remove the hub, then put the wheel in by sliding it in from the l/h side (from the rear) with the hub still off then put the spinel in place without the spacer (r/h side) and rear brake mount.

Then twist the wheel sideways with the spinel in place (so the front part of the wheel is twisted over to the left and the rear over to the right) locat the hub on the wheel and bolt up the hub onto the swing arm.

Then remove the spinel and place the spacer and rear brake hanger, replace the spinel and bolt up I had apx 5mm between the tyre and swing arm.

Just to make shore it the gsx1100g 4.5" rear wheel with a 160 tyre.

Link to comment
  • 6 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...