Jump to content

carlinmidarlin

Members
  • Posts

    234
  • Joined

  • Last visited

Everything posted by carlinmidarlin

  1. Just done a dry fit on my brothers 12 bandit
  2. How much are these going for these days
  3. Sika flex or tiger seal mate
  4. Been busy making these for my slingshot, just got to flat n polish and then I can fit over my engine covers
  5. Hi, are mk1 12 bandit coils the same as 600 bandit cheers
  6. Been looking abit more into this, if the rocker breather is taken off and carbs, dose this help cheers
  7. Just my luck as mines a 750 J its a engine out job then
  8. Hi, is it possible to remove the rocker cover from a 12 bandit motor in a 750 slingshot frame just asking before I start the do the valve clearances cheers
  9. Hiya anyone got the sizes of the front wheel dust seal for the 750/1100 M/N please I just need the spacer measurement as I not got it with me cheers
  10. How was the fitting as I’ve got 1 for mine that need doing
  11. Hiya, I’ve managed to get a set done, I’m just waiting on the fixings to come now,this is how mine look on the bike
  12. I started 1 tonight to see how it held up, and things look good so far, even out th mould there’s lots of work to be done
  13. Hi guys just an update to all that have asked about my bits I made, yes I did make a mould, but I’ve only got 1 so if it fucks up I can’t do loads plus I’m mad busy at work and other shit on at the min, I could do some for you lads but it’s not a quick job
  14. I made these for mine Carbon n resin
  15. Thanks all, I’ve got it out now
  16. Cheers you don’t no the part number do you
  17. Hi all whats the best way to get the breather out of the tank ive had a go but it seems solid cheers
  18. What about the rubber not having a vacuum take off, the std 12 bandit carbs that were on the bike had 1 outlet blanked off from the tap and I’m sure the vacuum pipe came off the top off the carbs, the bike has always run on 3 and a bit cylinders until warmed up cheers
  19. Is this bit wrong and I should do the 2 hoses from the tap to what you have said
×
×
  • Create New...