TrunKz

PM… good warehouse;)

I‘m looking for the D Cams… does anyone have any to give away?

I have to apologize for the stupid question. I simply hadn't seen the mark in the area of the upper screw. the previous owner had taped the cover with black sealant. thread can be deleted.

That’s clear. But is it necessary to use this timing plate

the EF has no markings for F/T. how can i set the ignition?

Hi, i want to adjust a Dyna S in the efe. It’s a little bit different to a GSX. the EFE works with the T Mark in the middle of the left connector when I use now the ATU from the GSX is the T mark nearly on the top, but not in a line with the white marked stripe on the old ignition plate. what is the correct way to adjust a Dyna S? 1: the stock atu with T mark to the middle of the left connector 2. change the ATU (no Position change 3. install the Dyna plate and adjust the connectors Is T the same like F ? I’m not sure that it works Thanks for help

I use exacty these parts. i don’t want to fit the holder an the JMC. i need an good idea for a torque link near the axle maybe to fit it in the slotted area

so is. I wonder what the guy built before. before that I had the torgue arm

Tighten nut

Enough to swing

Ahhh I understand ! ok mhhh I would not like to attach or weld something to the jmc Maybe an option.. expensive option without anything. Only the hanger

Puuh and how looks the other one ?

I use these one

So it is

I don’t have this main stand anymore

Efe with GSXR 1100 swingarm where can I fix the torque arm on my efe frame?

Of course, thats the easiest way.

And the middle holder from the footrest?

Hey, its an Raask footrest on my EFE frame with GSXR swingarm, but i´m to tall for these footrest. today I wanted to change my sport footrest for the stock footrest. But it will not fit. The left side is not so the problem. But its not possible the fit the right side, the swingarm is to wide. How can I fit the stock footrest? What must I change? Cheers from germany

Hi guys, I was asked by a friend today if I'm interested in his Hayabusa swingarm with wheel and accessories. Has any of you installed a Haya swingarm in the EFE? Best regards

me too

I thought more of a technical drawing with dimensions to get one made. Unfortunately, I can not accept the dimensions of the stock brake caliper holder because the brake discs are different. I am only concerned with the dimensions of the front as the distance from the axle to the holes for the brake calipers. And their distances among themselves I need measurements for the red lines. Thank you for your patience: p

I thought of something that looked almost like the standard one