Jump to content

Bikemad

Members
  • Posts

    12
  • Joined

  • Last visited

Reputation

0 Neutral

Personal Information

  • Location
    Wedtmidlands

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Not sure of bhp.but no r1 can keep up with this off the mark.as it's been geared up to .
  2. Yes I did use standard steels.I had to use some mild abrasive on the steels as there were burnt marks on them.
  3. Hi can you confirm you have 2 spring diaphragms. As mine has a standard suzuki diaphragm and a HD one as I was told to do this to cure problem.appreciate guys all the advice but I think I'm going to go with fat blokeonbandit.will see how much a genuine suzuki clutch will cost me from suzuki tomoz thanks
  4. Oh as I ride the bike all year round. As it's my main transport as I doe do cars.oil is 10/40 semI synthetic.
  5. Well this is the store. Brought bike 2yrs ago .engine was rebuilt by a guy who builds engines for dragster. It got high lift cams. Big bore kit and jetted.up.I can tell you this bike is a animal. When I had not long had it noticed the clutch slips in 3rd when the rev range it high.so I put HD spring along with sure flex clutch kit.then I put in motul semi sym the tic oil and this did the job.2 yrs on and I decided to change the oil and filter.high flow filter and same oil.since I did the oil change its off again same problem.I was told to put pure mineral oil in. So do you recommend put a genuine suzuki clutch plates and steels in.
  6. Hi mine has a big bore kit and jetted.and I brought sure flex clutch plates.new HD spring .and now it's started slipping..
  7. Hi been looking for second hand parts to do this bandit clutch conversion. But had no luck finding one.if anyone comes across one plz let me know thanks
  8. Hi just wondering if any one has experienced there bulbs keep blowing.I ride a mrk1 gsf 1200 bandit .I always ride with my head light on main beam and every 2/3 weeks it blows the high beam I then switch onto low beam and the same happens .any suggestions plz
  9. Hi my bandit 1200 mrk1 has the crap type clutch fitted with the diaphragm spring clip. I need info on the suzuki gsxr 100 slingshot conversion on bandit.anyone done it.if so can some one tell me what I need to do the change plz.
×
×
  • Create New...