Jump to content

Crank drilling???....


Recommended Posts

10 hours ago, Sam-Jaffa said:

Yeah same setup, they have the castlated trigger wheel bolted to the middle of the output shaft.

I could look at making back plate that would bolt onto the the sprocket like you mention, I don't want too much unnecessary weight over that way as I don't want to bugger the output shaft bearing......it am I over thinking...O.o

You will only need to make a plate out of max 2mm steel so no real weigh there ;)

I was think of say a U shaped peace of steel with one hole to bolt the Speedo trigger to and two bolt holes to bolt to the f/sprocket.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...