Jump to content

Inazuma 1200 front end to 1100 ET


Recommended Posts

Bandit stem into et frame-you can use the stem/yokes from the bandit but requires shortening by 25mm as longer than the et setup. you've got 5mm to play with. Could be a straight swap if you can take up the 5mm with a spacer? Job done. Bearings are the same from memory...Was seven years or so ago when I popped a set of B12 forks in mine so casting my mind back... ET stems are welded into the yokes so requires chopping about. Or at least my 750 ones were. B12's just press out.

:)

Edited by Toecutter
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...