Jump to content

6 speed bandit 1200


Recommended Posts

How to is in Frankenstein's guide ..blandit motor is almost the same as the 1127

 750R 6 box in a 1127 motor
The only hard thing here is to have a hole drilled through the gear box shaft, for the pushrod.
The 750 6 boxes have a single row bearing on the output shaft, and the clutch does
not have a diaphragm spring. So the easiest 1127 engines to put a 6 box in are the ones with a
single row bearing on the output shaft, and no diaphragm clutch, ie. only the GSXF1127 engines.
In these engines the 6 box drops straight in, only the shaft has to be drilled.
Second easy would be an 1127R engine with a diaphragm clutch, but no double row bearing (88-90).
In this case the box would still drop in, but for the clutch one would have to use the inner
clutch parts from a GSXF1127 (with normal springs) and the outer clutch basket from the 1127R
(with a straight cut gear, not helical).
Most work is in a 91/92 1127R where one would have to match the clutch as above + find a
solution for the double row bearing (the solution is actually to turn the double row bearing
inside out, and make a little hole for the small pin).
Of course the shift drum and forks from the 6 box have to be used as well, but they drop in
any 1127 without problems.

 

Simples.............9_9

  • Like 1
Link to comment

Thanks for the responses, I did read the Frankenstein post about this, but it didn't say what gearbox to use, like any year oil cooled 750 or?

Also its more for being able to keep its normal acceleration but also have easier cruise on the freeway.

Maybe at some point ill do the whole big boar kit but it already has 1100 cams, jet kit, ignition advance and holeshot header, its fast for now lol

  • Like 1
Link to comment
7 minutes ago, tm300enduro said:

 

easier cruise on the freeway.

Maybe at some point ill do the whole big boar kit but it already has 1100 cams, jet kit, ignition advance and holeshot header, its fast for now lol

Bahhhh....put a turbo on it....leave the gearbox alone....lower the rear sprocket by 3 or more teeth.....you will have all the cruise speed you want.....and special whooosh whoooosh noises too !

  • Like 1
Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...