canamant Posted February 18, 2018 Share Posted February 18, 2018 Does anyone know the bearing number or dimensions of the pair of needle bearings that go inside the eccentric on the rocker. I can get a bolt and make the sleeve if I know the bearing number or ID Rhanks Quote Link to comment
clivegto Posted February 21, 2018 Share Posted February 21, 2018 Will see if I can measure them tomorrow. These ones I presume. Quote Link to comment
Swiss Toni Posted February 21, 2018 Share Posted February 21, 2018 According to Aplhasports website, bearing sizes for '88 model 1100 eccentric are: 17 x 24 x15. Contact bearing factor with sizes, and he'll come up with a number. Or, you may be able to cross reference on-line. Quote Link to comment
canamant Posted February 23, 2018 Author Share Posted February 23, 2018 This has been sorted now thanks. Took a punt on the 2nd half of the part number being generic bearing number and found it was the right OD. Can't get the bolt or sleeve though but found that Z1000/Z900 gudgeon pin is correct OD but stlightly smaller ID so will bore it out on lathe and shorten to suit. Quote Link to comment
Swiss Toni Posted February 23, 2018 Share Posted February 23, 2018 Sorted then! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.