Jump to content

GS700ES/GSX750ES


Quincey

Recommended Posts

Good evening all,

Have a bit of a dilemma and hope someone can assist.

I bought an 83 Canadian Gs750es and notice a fork seal is blown.

Looking at the forks I see they are air linked, pity as I assumed they would be the european version with the preload on top.

Doing a search on parts appears the air forks are listed as GS700e so questions 

what is the oil capacity of each leg  is it the same as the ES

what is the air pressure range 

also could I use the Hagon progressive spring from their ES listing as original parts number for E and Es appear the same and could get rid of the air 

thanks Quincey 

Link to comment

I would strongly expect your Canadian GS750 to be nearly identical to the same year US GS700 of the same year (engine bore size would be slightly smaller on the 700).  The 700 was to get around the US import tariff on bikes over 700cc during the mid eighties.  If you use info for 83 GS700 you should be fine, but wait for a second opinion on that one, it's possible there were some other differences between US and Canadian models. 

Do any of our Canadian members have any advice?

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...