Reelinfeele Posted January 20, 2018 Share Posted January 20, 2018 Hey all, my mikuni/motion pro push pull throttle setup is bagged. Looking for suggestions on another set up. This one only has 2k miles on it. Running rs36"s. The tube is worn out on push side and yet he cables seem to long anyway. Was looking at the Rev2 setup, but can't find info on cable lentghs. So I am not sure which one to get. Thanks! Quote Link to comment
cregnybaa Posted January 21, 2018 Share Posted January 21, 2018 DR 600 has a pull/push throttle. Quote Link to comment
Blubber Posted January 21, 2018 Share Posted January 21, 2018 Had rs36 on my Efe project. Use a complete setup from a r1... Switches, brake master and the throttle assembly. Worked fine on the street for 10.000km Quote Link to comment
KATANAMANGLER Posted January 21, 2018 Share Posted January 21, 2018 The RF 900 has a push pull throttle with integrated switch gear. Quote Link to comment
banoffee Posted January 21, 2018 Share Posted January 21, 2018 Slabby 750 is the same Quote Link to comment
coombehouse Posted January 21, 2018 Share Posted January 21, 2018 Gsxr600k for me Quote Link to comment
Arttu Posted January 22, 2018 Share Posted January 22, 2018 CBR1000 (old one) works as well. Ok, I'll get my coat... 1 Quote Link to comment
Jonboy Posted January 22, 2018 Share Posted January 22, 2018 I am using a Kat 1000 switch unit as it is twin pull and plugged straight into loom Quote Link to comment
arnout Posted January 23, 2018 Share Posted January 23, 2018 GS750, from a year slide carbs were fitted. I believe other Suzukis (GS1000C, GT550) had the same twin cable throttle. Nice and simple as far as the switch block goes, just a start button and (black) kill switch. Made from aluminium, not plastic. Quote Link to comment
SiBag Posted January 23, 2018 Share Posted January 23, 2018 Same as @BlubberI had R1 fitted to my RS38's Quote Link to comment
Kraptanaman Posted January 23, 2018 Share Posted January 23, 2018 gsxr1000 k5 i think Quote Link to comment
nlovien Posted January 23, 2018 Share Posted January 23, 2018 On 22/01/2018 at 4:56 AM, Arttu said: CBR1000 (old one) works as well. Ok, I'll get my coat... thats my coat ! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.