Jump to content
Sign in to follow this  
wraith

Gsxr600srad forks size?

Recommended Posts

Looking at some gsxr600 srad (96-98 rwu) forks for a project, and I need to know what length they are?

Was told by one person they are 775mm? Someone else told me 730mm?

Both from top to center of spindle.

Any help thanks.

 

Share this post


Link to post

as the 750 and 600  frames are the same and the wheel and the forks are interchangeable, even though ones rwu and one usd,  they must be the same length. 750 ones I had recently were 725-730mm:tu

Share this post


Link to post

Was they the same forks on the RF600 which was 750mm   as where the 750 rwu forks  or do what i do find some on Eblag message them to get size  (y)

Share this post


Link to post
5 hours ago, micktodd said:

Was they the same forks on the RF600 which was 750mm   as where the 750 rwu forks  or do what i do find some on Eblag message them to get size  (y)

The gsxr750 slingshot are 730mm (rwu) the gsxr1100 slingshot are apx 760mm, don't know about the RF6 but, I fort the srad forks where 45mm diameter?

Something in the back of my head says the RF6 forks where 41mm diameter?

Share this post


Link to post

Yeah rf600 are 41mm but sure they are same  length but  who knows with suzuki . I went with  gsxr 1100 w ones on mine because said they where the longest   but Bandit 400  are 820mm which allows for the 17" im putting on instead of the 19"

5 minutes ago, wraith said:

The gsxr750 slingshot are 730mm (rwu) the gsxr1100 slingshot are apx 760mm, don't know about the RF6 but, I fort the srad forks where 45mm diameter?

Something in the back of my head says the RF6 forks where 41mm diameter?

 

Share this post


Link to post

What project???  teh 600 srad are very beefy good forks,  a mate raced one and when set up the thing handles and braked brilliantly, 400 bandit forks are really spindly by comparison, how much length do you need???

 

1200 bandit ones are 43mm and 770 mm long but have bugger all adjust ability except spring comp..:tu

Share this post


Link to post
2 hours ago, fatblokeonbandit said:

 how much length do you need

That's a good question, I know, using a GS/GSX 750,1000,1100 frame to get the ground clearance about 760mm ( or should I say I'm using gsxr1100k on my kat ;)) but this will be for a gs650 framed project, so may get away with a shorter fork?

Share this post


Link to post

Just been out tut shed. Have  srad 600 front end 1997. Measures 281/2 inches or 724mm in euro speak. From ctr of spindle to top face of cap nut. Maybe a bit tired on springs soo add a few mm. :)

Edited by Cheeky4648

Share this post


Link to post

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×