Jump to content

Slabby lock stops


Blue

Recommended Posts

Not able to weld anything as yokes are anodised & frame is powder coated. Top yoke is thicker than standard so I don't think there's enough room to fit a steering damper bracket under top nut. It's either make a bracket & drill the front of the bottom yoke to make a stop or fit a side damper with a bracket coming off one of the 3 (or all of em) pinch bolts to a bracket off the side of the engine or frame & use that as a stop

Link to comment
2 hours ago, Blue said:

Not able to weld anything as yokes are anodised & frame is powder coated. Top yoke is thicker than standard so I don't think there's enough room to fit a steering damper bracket under top nut. It's either make a bracket & drill the front of the bottom yoke to make a stop or fit a side damper with a bracket coming off one of the 3 (or all of em) pinch bolts to a bracket off the side of the engine or frame & use that as a stop

A pic would help maybe 

Link to comment
  • 10 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...