clutch cable conversion on gsxr11 bandit engine12

[Markz9]

hi I am in the process of converting my gsxr race bike to cable clutch the 600 bandit cover, cable and lever perch were supposed to be from the bandit but what ever way I route the cable it is too short and it ought to be too long

can some one confirm the length of a standard bandit 600 clutch cable before I start ringing venhill for a one off 

mark

[Nutter.]

will be interested to know what you used as want to do to gsxr1100m

[Markz9]

Have a look on evil bay suzuki bandit 600 mk1 sprocket cover and few will come up you will need the cover,lifter mech behind the rubber bung, cable clutch lever and the perch the length of the pushrod is a bit of trial and error to get right but it's only short bit of 6mm bar make another if you muck up

[fatblokeonbandit]

Ill measure mine in a minute, ive done it several times and b600 cables are well long enough???

[Nutter.]

thanks markz9

 

[fatblokeonbandit]

Here you go shipmate

 

 

 

 

[Duckndive]

11 minutes ago, fatblokeonbandit said:

Here you go shipmate

 

 

 

Does your cable have a 90 Deg bend on the lever end ?

only curious as the one I use does "but not 100%" its a B6 one

[fatblokeonbandit]

Nope b6 ones are straight

geuss yours is off of a gsxr or somthing

[Captain Chaos]

Teapot has a 90 degree bend. Got one on my 7/11.

[Duckndive]

1 hour ago, Captain Chaos said:

Teapot has a 90 degree bend. Got one on my 7/11.

Thank you 

Edited June 10, 2017 by Duckndive

[Markz9]

5 hours ago, fatblokeonbandit said:

Here you go shipmate

 

 

 

 

Hi Garry thanks for dims