bruteforce Posted June 28, 2016 Author Share Posted June 28, 2016 New oil makes the clutch hold better, new hydraulic lines to the cooler has fixed the oilleak. Was on my way to @Rene EFE when I felt my buttocks clench harder and harder while the AFR was slowly reading lean, leaner, leanest. When it indicated 20 with the motor still purring like a kitten I finally realised that the meter must be at fault. On the way back it indicated faultlessly. Any idea why this happened? Tesfitting the trailer for Cadwell Somehow it still has not sunk in yet that I finally have the level of performance in the bike I wanted to reach all these years. It is like a modern high-performance machine: You can ride the 1200cc motor very civilised and smooth on the plentiful torque around town and find ridiculous amounts of RAW POWER when you spool the turbo up. I now need to fit a new rear tyre as this one has completely squared off leaving those neat rolls of rubber on the surface. Needless to say I'm a happy bunny. 7 Quote Link to comment
Leblowski Posted June 29, 2016 Share Posted June 29, 2016 Meter properly calibrated ? A wideband can give false readings when af is way to rich also. Quote Link to comment
bruteforce Posted June 29, 2016 Author Share Posted June 29, 2016 yes was calibrated at install, worked OK before and works OK again now Quote Link to comment
bruteforce Posted July 7, 2016 Author Share Posted July 7, 2016 Ready 4 Cadwell! TurboTouringMachine 11 Quote Link to comment
Maggotbreath Posted July 8, 2016 Share Posted July 8, 2016 Dude, put everything you think you need on the living room floor. Then immediately remove 50%, leave it for 24 hours and remove another 50%, now you should be ready to go. 1 Quote Link to comment
bruteforce Posted July 13, 2016 Author Share Posted July 13, 2016 Yeah, I always take too much stuff with me but then I'm rather taking a set of dry clothes too much than walking around wet... Apparently I will get a small feature in augusts' Practical Sportsbikes magazine. I was spotted packed like this with a clearly "ridden" dirty bike. They were surprised that I got there on the turbobike "all the way from Holland"- it's only 100 miles guys, the rest is done by boat.... Quote Link to comment
no class Posted October 23, 2016 Share Posted October 23, 2016 Hi Marco , seems the old crowd are finding there way back..... nice to see the ol' GS is still around ! mine have all since vanished ...... but there has been a recent acquisition in the TC household.....in the form of an 1983 katana 1100 . project will commence soon ! 2 Quote Link to comment
gmansyz Posted February 19, 2017 Share Posted February 19, 2017 Hiya'allz, F.I. time Marco? Is that Subi turbo a ball bearing unit? Really love the real, ridden everywhere look of the bike! LaterG G 1 Quote Link to comment
bruteforce Posted February 22, 2017 Author Share Posted February 22, 2017 Hi Greg, See my new topic in "members" part of this site. Subaru unit is a plain bearing type turbo. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.