Jump to content

Search the Community

Showing results for tags '600'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • Technical Forums
    • OSS Racers
    • Air Cooled
    • Oil Cooled
    • Water Cooled, V-Twins, Singles and 2-strokes
    • Forced Induction
    • Trick Frames
  • General
    • Events

Calendars

There are no results to display.


Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


Location

Found 5 results

  1. May be a dumb question, byt doea anyone know what the acceptable charging voltages are for a 600 srad? On idle mine is 14.3V and with the revs up it 12.8V Thank you in advance.
  2. Got a spare 98' Bandit 600 that I'm bored of and want to make into a little fun project. Would love to turbo charge it. A few things to consider: Blow through or draw through? I'd like to go draw through as there are less things to tinker with/modify and just looks a whole lot easier and possibly cheaper. Oil feed for the turbo. Best way to go about this? What turbo to use? Something easy to spool, something that won't create too much power. Cooling? Obviously the bike is oil cooled. You don't need an intercooler to run with a draw through turbo setup. Would a bigger oil cooler rad be a good option? Just asking for anyones know-how on this situation. Any tips, tricks and wisdom will be greatly appreciated.
  3. Hi Anyone got a pic of, I think, the Harris race fairng mount ? Want to see what one looks like and if can make one It`s the one that clocks mount to and then has a centre arm that goes out to front of fairing, that it bolts to, to hold upper fairing in position. My headlight is lugless and was going to fill headlight hole in fairing, moulding thermo plastic to headlight to get shape and then, fingers crossed, weld it in position. Then cut a hole for a single gsxr,zxr,cbr 400 headlight
  4. Hey guys I'm back after a very long absence of owning a new vehicle in the shape of a k3 gsxr 1000, the was knicked, insurance underpaid so I now have a bandit 600 until premiums go down so far I have fitted dynacoils, iggy advancer, stage 1 kit and a temporary hiflo filter while I source a K&N one. I have a full system to go on, them exhaust bolts though.... I've also replaced the caliper seals and head bearings it feels like a new bike from that work!
  5. Hi All, I am currently working on my Bandit 600 which is lets say my first proper sports bike, anyhow to cut a long story short, bandit engine has high mileage, damaged rings, and damaged headers ie, all bolts well and truly seized and manifold rusted through. This is where I decide to go buy a GSXR 750 engine. Now me being a noob I dont look too much into it and just buy the first engine I see which is a R705 86 GSXR 750 Slabside engine. It came with a set of bandit carbs in miserable enough condition. I bought a small ultrasonic cleaner off Donedeal (craiglist in Ireland basically) and set about cleaning up the carbs. Stripped them all down cleaned them out and rebuilt them with a sigma 6 jet kit, I gave them the specs off the bike. So on Christmas Eve myself and the younger brother got the engine in the bike, over the next few weeks continued bit by bit. I have the bandit sump and oil pickup on there now. I have the bandit carbs on there, installed 4 new spark plugs, foam air filter socks onto the original boots. Bandit 600 oil cooler connected and the bike somewhat back together. Also fitted a new set of stainless steel headers from Black Widow Exhausts in the UK and a Danmoto GP Extreme exhaust. Now what brings me to being on here is the fact that I have a few questions to ask, this is the moment where everyone face palms and says use the god damn search box, well I have done quite a bit of research and I just can't find and definitive answers so any help would be much obliged. 1. Are the carbs big enough, the slabside originally came with 28mm so I presume 32mm is loads? 2. Will the Bandit 6 Oil cooler be sufficient or do I need to upgrade? 3. Will the exhaust flow enough air or is the bandit headers knows to cause problems? 4. When I got the engine it was just the engine, I got no sprocket cover so I tried the bandit one and discovered (well I presume) the actuator pin is too short, anyone know what size I should cut a new length of 6mm steel rod to? 5. All the connectors between the 86 GSXR Engine and the 99 Bandit 600 loom match up. i believe the GSXR has twin ignition pickups but the bandit has single, do I need to change the ignition pickups or can I simply connect the one with the matching connector and color cables and leave the other idle? If I do need to swap the pickups, is it easy to do? I am just waiting on an oil filter now and I will fill it with oil and try start her up. I still have no idea if the engine is good as I bought it off Donedeal hoping it will be fine. If everything works as I am hoping should have it running tomorrow night. Anyway as I said any help would be much appreciated. Thanks in advance, Ciath O'Riain
×
×
  • Create New...