| Date |
Site |
News |
| December
27th |
7/11
Boulevard |
Bored to
death during christmas holidays? Rip your carbs from the bike
and give them a quick check-up to have your bike running and
spinning again in springtime! I've written a
small article describing how I do it on my Mikuni RS's. |
| December
21st |
RN(S) |
Suzuki’s early GSX-R750 has always
been a popular bike for special builders. French firm Motomate
has taken it a mad stage further.
Click here to learn
more.
|
| December
19th |
After-EFEcts |
All
summer long I wanted to convert my buddyseat, lower it a little
bit and have it blue upholstered. Before I took it to the upholstery,
I prototyped it with PS5. See what it looks like here. |
| December
18th |
7/11
Boulevard |
Check out
Mr.7/11's
parts compatibility list if you need some basic info on
what fits what.... |
| December
17th |
7/11
Boulevard |
I took some
time to present the
theoretical side of re-wiring my bike...
you could actually learn something from this! |
| December
10th |
7/11
Boulevard |
Last weekend
it was freezing for the first time so I spent some time in the
garage. I was planning to do some minor cleaning but before
I knew it there were parts scattered everywhere and now there's
only a bare frame and engine left... getting carried away I
guess.
Plans this winter are to create the ultimate wiring loom that
will produce the fattest spark this side of a nuclear chain
reaction!
Inspired by an article written by Tony Foale I think I have
created one of the most efficient wiring looms possible with
the help of Ludo. Aim was to provide the highest current to
the ignition coils with as less resistance = connectors as possible,
we did this by feeding the coils directly from the alternator
and switching it using a low-resistance relay. The mass of the
coils is connected directly to the - pole of the battery. Have
a look at the final
schematic, the complete article will follow later on. -
Mr.7/11 |
| December
7th |
RN(S) |
Now
here's a good one for the "If you can't beat 'em, fuck
'em up" department, Martin
Hillier understood what it's all about. |
| November
21st |
RN(S) |
Here's another
DIY article... "How
to repair cracked engine covers". |
| November
16th |
RN(S) |
|
| October
9th |
After-EFEcts |
Finally
found some time to make up a page with spec's and pictures
of my EFE. Click here
to take look.
|
| October
8th |
RN(S) |
Hok14
published picture's of their latest party on their site, check
it out to see what you might have missed...........
|
| October
1st |
RN(S) |
Another step
towards world domination ;-)
This week Jasper will
launch the new design of his famous R-House
website. He will
kill his old advert-infested "Global Gixxer Message Board"
and send all his visitors to our brilliant new
message board, so expect a lot of new people singing in
to plead for our expert advise ;-) |
| September
18th |
After-EFEcts |
Updated
the Streetbikes
and Stripbikes sections,
already 35 pic's of EFE's online now. Keep sending them in boys
and girls. |
| September
16th |
RN(S) |
Team RN(S)
went to a great party in Hengelo, organised
by Hok14 (thanks boys and girls) where Mr. 7/11 scored the
prize for "Best Homemade Bike" and got stonedead
drunk afterwards. The prize came as a trophy of which you
see a picture here.
 |
Click
on the image for the full report of what you (may) have
missed, and damn did you miss someting!
(Not
sure though if it's the skull on the right or the one
on the left which was the trophy)
|
|
| September
13th |
RN(S) |
We have reorganized
the various categories of the messageboard, sorted by engine
type (air- oil- and watercooled) to make things simple.
Unless you want to fit a GSX-R1100W engine into an old Katana
frame, then you'll be hopelessly lost ;-)
I didn't remove messages, just moved them around a bit. |
| September
12th |
RN(S) |
MCNews has published various dyno
runs comparing the GSX1400 with the Bandit 1200, XJR1300
and even a 1500 Vulcan!
And Dave from the Katana
Specials website announced that the November issue
#93 (on sale from the 4th of October) of StreetFighters
Magazine will be a "Katana Special".
Be sure not to miss it!
|
| September
10th |
RN(S) |
New addition
to the calender... Street or Track
part 2 on november 17th and 18th |
| September
6th |
HardCore
Kats |
We now have the GSX1100S
Owners Manual and brochure
on-line.
And... the WWW
Katana picture collection has been updated with our latest
findings, now counting 103 images!
|
| September
4th |
RN(S) |
I admit it's a bit crude and not very friendly but we got
so sick and tired from the old forum that we killed it in
an instant and replaced it with the best forum script we could
find. It has all the bells and whistles and even e-mail notification
works now! Go
give it a try!
Old messages can be found here.
|
| September
3rd |
After-EFEcts |
Our staff
photographer Fem has made some beautiful pictures
at the Drachten Eurofinals last weekend. |
| August
29th |
RN(S) |
We've now
got an event-calender to see where
Team RN(S)
is hanging out next weekend. |
| August
27th |
HardCore
Kats |
We've got
an exclusive
picture of the new 2002 model GSX1400S Katana! (yes, it
uses the all new GSX1400 engine!) |
| August
20th |
After-EFEcts |
Bral®
added some rear-tyre advice
to learn more about how to handle rubber. (And kids, don't do
this @ home !)
Forgot to take pic's of the "new" USD frontend but
they will follow shortly after. |
| August
17th |
HardCore
Kats |
I've added
two more pictures to the YoshiKat
1135R page... two bigger pictures from the Tokyo Motor Show. |
| August
17th |
RN(S) |
Robby says
"Keep away from Yamaha R6's"!
There have been many reports of R6's with bent shift forks.
Yamaha's official response is "If you wheelie a R6 it will
break down!"
Bring on the SRAD's! |
| August
17th |
7/11
Boulevard |
Martijn has
sent us a wallpaper
of the most wanted heart-transplant donor, the GSX1400.
Come to think of it, as my GSX1100F engine spits out at least
40 horses more at the rear wheel I might just be able to tempt
a fresh GSX1400 owner into a swap... maybe ;-) |
| August
16th |
7/11
Boulevard |
 |
Jasper, webmaster
of R-House
has decided to scare himself shitless once in a while
and bought a water-cooled 7/11! |
The bike is
tuned by dutch firm Ten Kate (well known for their SuperSport
H*nda CBR's, engine is of 1994, full race Yosh with carbon
end-can, 2x2 K&Ns, Dynojet kit, beefed-up clutch,
6-speed gearbox and a cable-operated clutch. Max. power
is claimed to be 164hp at the crank.
Welcome to the club, Jas! |
|
| August
14th |
HardCore
Kats |
We have collected
some info about the 1135R here...
with the specifications translated from japanese!
And while we're at it I've also translated the specs
of the Katana Final Edition. Boy, my japanese is getting
better and better ;-) |
| August
13th |
After-EFEcts |
Web news:
Arnout has updated his GSX1100
pages and the GS-Resources
website has had a face-lift. |
| August
13th |
HardCore
Kats |
Airhead has
produced a lovely 1024x786
Yoshimura Katana 1135R wallpaper |
| August
10th |
HardCore
Kats |
 |
<< Click
on the bike and make
sure you've got some Kleenex
tissues ready! |
|
| August
10th |
7/11
Boulevard |
Back to the future...
Suzuki
GS1200SS |
| August
7th |
RN(S) |
Performance Bikes Magazine isn't imported into Holland anymore!
I've been trying to get my hands on the August issue after
Roel van Maarseveen stopped his agency but to no avail.
Some bookstore owners tell me it isn't imported anymore!?!
|
| August
3rd |
RN(S) |
News behind the scenes...
Just before celebrating his 30th birthday Robby sold his 'Blade
and now is looking for a crash-damaged R6 to be given the UST*-treatment.
So if you know of one send
him an e-mail.
* Ultimate Stunt Tool |
| July
30th |
7/11
Boulevard |
Mr.7/11 is back from his
4 week holiday and celebrated his 33th birthday yesterday! Finally
did some work on the Gixxerday report, only needs a few more
lines of text and then it will be up. |
|
July
24th
|
After-EFEcts
|
Due
to the fact that the entire Team RN(S)
took a well earned holiday there's not a lot goin' on here
at the moment but....at least Bral® managed to get back
in one piece and so here we go again.
I
purchased a '93 750 USD frontend which will be in place within
a few dayz, also bought a set of 6 pot Tokico calipers to
go with it..............it's getting better already........
|
