Here is some info that might be helpful for those who are interested in fine tuning their bikes camshafts.
The common range of lobe center values for SUZUKI engines is only about 10 degrees wide from about 102 to 112 degrees, a change of one degree can have considerable effect on the power delivery characteristics of a SUZUKI engine.
The effect of moving lobe centers is that by advancing the intake and retarding the exhaust, known as CLOSING UP THE CENTERS, it will increase the valve overlap and will move the power UP in the RPM range, although it will at the sacrifice LOW- RPM power. The result would be LOWER numerical values on both intake and exhaust lobe centers.
If you retard the intake and advance the exhaust, known as SPREADING THE CENTERS, valve overlap will decrease and will result in a WIDER power band while sacrificing HI – RPM power. This is indicated by HIGHER numerical values on both intake and exhaust lobe centers.If you move only one cam the results are not as predictable, traditionaly it is the INTAKE CAM that is moved to change power characteristics since small changes here seem to have a greater effect.